Ecostrad iQ WiFi Instruction Manual Download Page 10

Ecostrad_iQ_WiFi_Element_V1.2_19072021                                                               10 

 

4 – 2 | Standby Mode 

 

In standby mode the time is displayed and the element does not heat. You can use 

the 

 button to switch between standby and the heating modes. When the 

element is first switched on, the time will appear as 00:00. The display will update 
to the correct time when the element is connected to the app.  

4 – 3 | Heating Modes 

Tap the 

 button to switch the element on. Tap 

 to switch between modes. The 

icon on the display will change accordingly, browsing through: Comfort 

, Eco 

Program 

, and Radiator 

 mode.  

4 – 3 – 1 | Comfort Mode 

 

When the 

 and 

 icon display on the screen, you are in 

comfort mode. In this mode, the element controls the room 
temperature and heats to a constant set temperature. The 
external thermostat measures the ambient temperature and 
instructs the element to heat or stop heating according to the 

temperature set. When heating, the 

 symbol flashes; when not 

heating, the 

 symbol is fixed.  

The temperature displayed is the set temperature. Set temperature range is 7-30 
°C and can be adjusted using the 

 and 

 buttons. You can check the current 

room temperature when you are connected to the app. 

The temperature set in comfort mode also applies to comfort intervals when they 
occur in program mode.  

4 – 3 – 2 | Eco Mode 

 

When the 

 and 

 icon display on the screen, you are in eco 

mode. Just like comfort, in this mode the element heats to a 
constant set room temperature. However, eco mode is designed 
to be set to a lower temperature, providing a low-heat, energy-
saving alternative for when you are sleeping or out. 

Set temperature range is 7-30 °C and can be adjusted using the 

 and 

 

buttons.  

The temperature set in eco mode also applies to eco intervals 
when they occur in program mode. 

4 – 3 – 3 | Program Mode 

 

When the 

 icon and current time display on the screen, you are 

in program mode. In this mode, the element follows a user-

Summary of Contents for iQ WiFi


















Reviews: