13.06.2017 Rev. 01
25
Ø
Oil adjustment regulator
1- Connecting rod
2- Scale coupler
3- Fuel connection points
4- Adjustment fixing bolt
5- Adjustment bolt
6- Housing cover (screw hood)
Fuel regulator adjustment
1-
Remove the housing cover number 6
2-
Loosen the fixing bolt number 4
3-
When you rotate the shaft number 5 (when looked from the shaft end) clockwise, the pressure
value you observe from return manometer will increase, and burner consumption will also
increase since nozzle pressure increases.
4-
When you rotate the shaft number 5 (when looked from the shaft end) anti-clockwise, the
pressure value you observe from return manometer will decrease, and burner consumption
will also decrease since nozzle pressure decreases.
5-
When the adjustment is completed, make sure that the adjustment you have made is permanent
by tightening the fixing bolt number 4.
6-
Place the housing cover number 6.
Summary of Contents for ECO 8 NG
