background image

ENG 
 FRA
ESP 
POR

DANGER 
 DANGER 

PELIGRO

PERIGO

FIRE 

 INCENDIE 

FUEGO

INCÊNDIO

EXPLOSION 
 EXPLOSION 
EXPLOSIÓN

EXPLOSÃO

FUMES 

 VAPEURS 
VAPORES
VAPORES

Instruction Manual

 WARNING: 

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and 

birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. 

Wash hands after handling.

• 

Keep torch out of reach of children and anyone who has not read instructions. Do not point torch towards face, other persons or 

flammable objects. Never attempt to use torch as a cigarette lighter.

• 

Disconnect cylinder when not in use.

• 

Never attempt to modify the torch construction and never use unapproved accessories or fuels.

• 

Treat the torch as you would any fine tool or instrument. Do not drop, throw, or otherwise abuse. 

• 

Do not use a leaking, damaged or malfunctioning torch.

• 

Always wear safety glasses, protective gloves and use proper tools to handle hot work. 

• 

Radiant energy can harm your eyes. Wear glasses having an appropriate lens shade number (see 29 CFR 1926.102) for the torch 

operation being done; brazing and light cutting (3 or 4), medium cutting and light welding (4 or 5), heavy cutting and medium/heavy 

welding (5-8).

• 

Work only in well-ventilated areas. Avoid the fumes from fluxes, lead-based paint, and all metal heating operations. Be careful to avoid 

fumes from cadmium plating and galvanized metal- remove these coatings in the area to be heated by filing or sanding prior to heating.

• 

Never use torch to strip lead paint.

• 

Be careful when using the torch outdoors on sunny or windy days. Bright light makes it difficult to see the torch’s flame. Wind may carry 

the torch’s heat back towards you or other areas not intended to be heated. Windy conditions may also cause sparks to be blown into 

other areas with combustible materials.

• 

Heating a surface may cause heat to be conducted to adjoining surfaces that may be combustible or become pressurized when heated. 

Always check to make sure no unintended parts or materials are being heated. 

• 

Be aware that the tip of the torch can get extremely hot during use. Take precautions to protect yourself and others from accidental 

burns. 

• 

Never use the torch on or near combustibles. Be careful around motor vehicles or any gasoline-fired products and beware of hidden fuel 

lines and tanks.

• 

Always make certain the torch is placed on a level surface when connected to the fuel cylinder to reduce the risk of accidental tip over. 

Be sure the torch is not pointed in a direction which could cause nearby objects to ignite when the torch is set down.

• 

Be careful not to overheat surrounding materials. Use a heat shield when necessary.

• 

Never leave the torch unattended when lit.

• 

Never attempt to repair or heat a gasoline tank, a chemical drum an aerosol can, a compressed gas container that held flammable liquid 

or gas or any other chemical. Heating these is extremely dangerous, especially after they have been emptied because vapors may still be 

in the container.

• 

Always have a fire extinguisher and a bucket of water near the torch and work area. 

• 

This torch consumes oxygen and must only be used in well ventilated areas. Do not use in a confined space. 

ASSEMBLY

1.  Make sure valve is OFF by turning knob (1) clockwise until hand tight only. Do not force.

2.  Turn fuel cylinder clockwise into valve body (2) until hand tight. Do not force.

3.  Check all joints and couplings periodically to insure against loose connections. With valve open, without lighting, test all connections 

with soapy water. If bubbles appear, gas is leaking and torch must be repaired. NEVER USE A FLAME TO CHECK FOR LEAKS. Make 

this test in a well ventilated and spark-free area and where there are no open flames. 

ENGLISH | ANGLAIS | INGLÉS | INGLÊS

Models: MT200C | MT245C

 DANGER 

This torch is used with a flammable product. Failure 

to comply with these Warnings and Instructions may 

result in an explosion or fire that may cause property 

damage, serious personal injury or death.
Read and comply with the instructions and warnings 

in this manual and familiarize yourself with the torch 

before lighting and using. Review instructions and 

warnings periodically to maintain awareness. Do not 

try to operate before reading instructions.
Torches are to be used only with hand held gas 

cylinders specifically designated for use with torches.

DO NOT DISCARD THESE WARNINGS AND INSTRUCTIONS | NE PAS JETER CES AVERTISSEMENTS ET CES INSTRUCTIONS

 NO DESECHE ESTAS ADVERTENCIAS E INSTRUCCIONES | NÃO DESCARTE ESTES AVISOS DE ATENÇÃO E INSTRUÇÕES

1

1

1

2

1

3

MT200C

1

1

1

2

1

3

MT245C

Summary of Contents for MT200C









Reviews: