ECOSTAR 430f, Translation Of The Original Operating Manual

Page: 16 / 36

Operating instructions EcoStar 430 F
Datei:1_EcoStar430F_9671080_Betriebsanleitung_EN_2001-07.doc Update: 2012-12-18, S. 24
9671080
16/26
W e reserv e the right to change ex ecution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
8.5 Operation during washing and rinsing cycle
The following fundamental principles must be observed when placing the items to be
washed in the baskets:

All hollow containers must always to be loaded upside down . Otherwise the water
will be trapped inside and they will not dry to a brilliant finish.

Plates should always stand at a slight angle in the basket.

When using cutlery baskets, ensure that cutlery is always inserted handle down.

Load the cutlery baskets with a mixture of spoons, knives and forks, as identical items
of cutlery can be too close together.

Do not overload the baskets.

Do not stack the dishes in the wash basket directly on top of each other. As the wash
water could not strike the items directly and unnecessarily long wash times would have
to be selected. Short wash times with baskets which are not overloaded are much
more economical.
8.5.1 Start the wash cycle
Program start key

Place the items in the basket.

Place the basket in the appliance, ensuring that it is correctly centred.

Close the door.

Press the program start key.
The appliance cleanes and rinses automatically and switches off the wash program after
completion. The program cycle is indicated by a yellow light on the "program is running"
start key.
8.5.2 Remove the cleaned items

When the light "Program is running" goes out,open the door and remove the basket.
You can repeat the programme as often as required.
9 Shutting down the dishwasher
“Off” key
Program start key

Press the OFF-key. The machine is switched off when all the lights are out

Remove the stand-pipe.
Machines without built-in drain pump:

After the water has been drained from the tank, the tank is sprayed with clean hot
water by pressing the Program Start button. The door must remain closed.
Machines with built-in drain pump:

Press the program start key to drain the tank.

The tank interior is sprayed with clean hot water after the tank water has been
drained. The door must remain closed. The waste water pump switches off
automatically.