Ecosoft FK Series, Instruction Manual

Page: 31 / 88

31
INSTRUCTION MANUAL ECOSOFT
®
MEDIA SYSTEMS
PROBLEM CAUSE CORRECTION
5. System
will not
regenerate.
No electric power. Check power supply.
No/insufficient salt in brine tank. Chech the amount of salt in brine tank
and add salt if needed.
Brine is not sucked in during
regen., or not all brine is drawn. See paragraph 6.
Control valve is out of order or
settings were changed. Check the control valve and its settings
(see the manual for the control valve).
Brine tank is not refilled or is
refilled with not enough water.
See paragraph 7.
6. Brine
will not
draw during
regeneration
or not all
brine will
draw.
Low supply water pressure. Check supply water pressure.
Clogged injector or brine tube. Clean brine injector and/or brine tube.
Clogged basket or salt crystals
on ball in air check valve. Clean air check valve basket and/or ball.
High pressure drop on the filter
(control valve, distributors or
filter media are clogged).
See paragraphs 1 and 4.
Air is injected due to brine line
not being airtight. Check airtightness of the drain line.
Control valve settings changed. Increase brine stage duration.
7. Brine tank
is not refilled
or refilled with
less water
than needed
Low supply water pressure. Check supply water pressure.
Clogged injector or brine tube. Clean brine injector and/or brine tube.
Stuck ball in the air check valve. Clean the air check valve.
Control valve settings changed.
Check the duration of brine tank refill and
correct if necessary.
8. Excess
use of salt per
renegeration
Control valve settings changed. Decrease the amount of salt per
regeneration in the control valve settings.
Brine tank filled with excess water.
See paragraph 9.
9.
Brine tank
is refilled with
excess water
High main water pressure. Check water pressure. Install pressure
regulator if needed.
Control valve settings changed. Check the duration of brine tank refill and
correct if necessary.