•
MAINTENANCE
SHARPEN BLADES
Sharpen blades when the mower will not cut satis-
factory without the reel blades wiping on the cutter
bar.
GEAR HOUSING ASSEMBLY
If the gear housing assembly is removed for service,
it is very important for the gear housing assembly to
fit UNDER the lip of the retainer. The shoulder on
the shoulder waster must fit into the slot on the end
plate. (Figure 12)
If the gear housing is not assembled
properly, it will result in loose wheels and
an early failure of the pinion and wheel.
(Figure 12)
FIGURE 12
9
