•
ASSEMBLY INSTRUCTIONS (cont.)
4. Attach the right and left upper handles (Part 1) to the handle braces (Part 3) with two M8x65 hex
bolts. Hand tighten the nuts (Figure 4).
5. Assemble the upper handles (Part 1) at the top with a M8x55 hex bolt, washer and nut.
6. Tighten all four bolts and nuts (Figures 4 and 5).
7. Place the handle panel (Part 2) in position over the handle (Figure 5).
8. Assemble the 5x5x25 hex washer head screw through the handle panel into the notch between the
upper handles (Part 1). Tighten both hex washer head screws.
FIGURE 4
FIGURE 5
Before tightening handle
bolts, fasten the handle
panel with the hex washer
head screws, then tighten
handle bolts.
5
