background image

CLEANING AND SERVICING

19

CLEANING

CARE

Charge the battery in full immediately after purchase as indicated in this manual.

Monitor the battery status at least every 3 months when stored, and charge it if needed. 

Avoid unnecessary contact with water to extend the life of the scooter and battery.

Batteries are susceptible to temperature. Do not park your EcoReco scooter directly 

under the sun or in very cold environments. Room temperature is ideal for storage.

Do not hang any object from the wires attached to the handlebars.

To avoid rust on screws and unnecessary wear, thoroughly clean and dry the scooter if you have 

operated it in the rain.

Washing

After washing

Use suitable cleaning and care agents and a soft sponge.

Never use solvents.

Never align a direct water spray to the scooter.

Rinse with clear water after washing to remove any cleaning residue.

Dry with a clean cloth.

Exercise extreme caution while performing some “dry brake” operations in a private, 

safe area. The water on the brake surface reduces the brake performance in the short 

term.

To protect your scooter from unnecessary damage:

SERVICE

Repair and maintenance service must be performed by the EcoReco service team or authorized 

dealers. Unauthorized actions might lead to a loss of the warranty. For repair and maintenance, 

please contact:

CLEANING AND SER

VICING

[email protected]

ecorecoscooter.com

Summary of Contents for M3


























Reviews: