EcoReco M series, Owner'S Manual

Page: 8 / 28

1 2 3 1 2 3
RECHARGEABLE BATTERY
AND CHARGER
BATTERY CONDITIONING
CHARGING THE BATTERY
The battery in your EcoReco scooter is state-of-the-art rechargeable Lithium FerroPhosphate (LiFePO4, or Li-Iron). It
is the most suitable material and advanced battery type for personal transport applications. it is significantly lighter
and smaller, and provides a longer life than an outdated, toxic Sealed Lead Acid battery. It also is inherently safer
and more environmentally friendly than a Li-Ion battery.
The EcoReco battery is pre-charged to 50% out of box for your convenience so you can ride it right away.
Use the EcoReco charger to recharge the battery when the battery reading on the dashboard is low. The most
efficient zone to charge is in between 1-4 bars. LiFePO4 batteries have no memory effect.
Expect the battery to charge from empty to 80% in 2 hours (recommended) or from empty to full in 4.5 hours.
Ensure the scooter is switched off, then open the end cap on top of the charging socket adjacent to the
kickstand.
Connect the charger circular plug to the scooter’s charging socket, then connect the charger 3 prong plug to the
power outlet.
The battery is charging when the charger LED is red. The charger LED turns green when it's 85% full. You can
continue to charge the scooter and top it off for additional 1-2 hours if needed. To stop charging, please remove
the 3 prong plug from the power outlet, then remove the circular plug from the scooter’s charging socket. Close
the end cap.
1.
2.
3.
4