EcoReco M series, Owner'S Manual

Page: 17 / 28

Warning
Always inspect the scooter for roadworthiness before use.
After some time of usage, the securing latch might become loose and pop up during operation, which would
put unintended stress on other parts of the folding structure and cause damages. To adjust the tightness,
please access from the bottom of the folding assembly and use a socket wrench to tighten the adjustment
nut until the latch can hold its right position during operations.
Find a private area without road traffic and with enough space for you to get used to your
EcoReco scooter.
Note that the T-bar height might feel differently once you step on the deck. Readjust it if needed
and make sure to tighten the T-bar tightening knob.
Lift up the kickstand.
If riding your EcoReco scooter for the first time,
familiarize yourself with its movement and
balance by "rolling" it without the power on : Depending on the stance you prefer, put your
dominant leg on the front of the deck and the other one on the ground. with your head
facing forward. Use the leg on the ground to push the scooter forward. Once you gain some
speed. gently lift up that leg and rest it on the back of the deck. If needed, adjust your grip
on the handlebars to remain balanced. Repeat the same movements once the scooter
slows down to keep it going.
Riding the scooter without power does not damage it.
Do not turn on the power until you feel confident“rolling”.
Press the EcoReco power button on the dashboard for 2 seconds until the display lights up.
The scooter is now ready for you to get on and take off.
Your EcoReco scooter offers Safe-Start protection to limit
unintended jerking. This means you must first roll the
soooter manually for an initial speed before the throttle
lever becomes activated.
Place your finger(s) over the
throttle lever and push in as desired to accelerate.
When the brake is activated, the throttle is deactivated.
See the “Brake” section for guidance on the brake and brake
lever.
A slight whirring sound is normal when the scooter is
powered on and moving.
To preserve the battery, press the power button to shut off.
the scooter shuts off automatically after 3 minutes of inactivity.
OPERATING TIPS
13