8
MAINTENANCE
Periodic maintenance is required to insure that the Living Air Classic operates
properly. A severely polluted environment can foul an Ecotech purification plate in
as little as two weeks or as long as a year. Shown here are basic maintenance
procedures that should be carried out to keep your unit running at top performance.
EcoHelp filter cleaning:
You have two options to clean the carbon lint screen:
• When visibly dirty, simply remove the lint screen and with a hand-held vacuum
remove the heavy particulate from the screen. This method will extend the life of the
filter.
-OR-
• When visibly dirty, remove the lint screen from the back of the unit and wash in hot
water, brushing gently with a toothbrush to remove particulate. Allow to dry prior to
re-installing the lint screen.
Ecotech purification plate
Carefully remove the Ecotech
purification plate from the
card cage by grasping the
middle of the edge nearest to
you, and slowly pulling
straight out.
Clean the plate with hot water
and ammonia. Dry completely
using a hair dryer if necessary.
Reinstall plate. Be sure to
check that the electrical tabs are in contact with the plate.
Plate Card Cage
Also be sure to clean the white stand-offs at the
corners of the plate card cage. (A cotton swab with
alcohol works well.)
Fan Blade and Front Grill
Wipe off fan blade and front grill if dirty with damp
washcloth. The fan requires no maintenance (with the
exception of the first time it is used, when it may be
necessary to give it a gentle push to get it started). If
the fan squeaks, a drop of lightweight oil may be
needed on the fan shaft.
