7
8.2 OZONE CONTROL.
The ozone control can turn on, turn off or adjust ozone function without degrees.
Keeping in mind the previous statement, adjust the purifier so that the odor
of ozone fades into the environment after 15-30 seconds.
To reduce mold, mildew, and bacteria, turn the unit on high settings for 3-4
hours to let air circulate out from room by opening doors or windows.
The POWER light turns to GREEN color when the “Fan” switch turned on,
the OZONE light turns to RED when the “Ozone” switch turned on. Ozone
switch is suggested to be switch on only in unoccupied spaces.
Do not look at front panel in short distance in case the UV light will bad for
your eyes.
Always be sure a room or area UNOCCUPIED before
performing the above described Ozone control
9. MAINTENANCE
Periodic maintenance is required to insure that the air purifier operates properly. A
severely polluted environment can foul a air purifier plate as little as four weeks or
as long as a year. Shown here are basic maintenance procedures that should be
carried out to keep your unit running at top performance.
Pre-filter / HEPA filter cleaning (see page 5 for removal instructions):
You have two options to clean the pre-filter, and HEPA filter:
• When visibly dirty, simply remove the pre-filter or HEPA filter and remove the
heavy particulate from the screen with a hand-held vacuum. This method will
extend the life of the screen / filter.
• When visibly dirty, remove the pre-filter and HEPA filter from the unit and wash it
in cool water, brush it gently with a toothbrush to remove particulate. Dry
completely prior to re-installing the lint screen.
Remove the back cover (page 5). Carefully remove each filter. Clean the filter with
cool water and ammonia. Dry completely prior to re-installing the filter (page 5).
10. Fan Blade and Front Grill
(take off front/reinstall grill method:
）
As left picture shows, hold bottom of front grill and pull
out, when latch take off front panel, turn over front gill
up about 30 degree.
