EcoQuest Fresh Air, Owner'S Manual

Page: 18 / 24

18
TROUBLESHOOTING
Indicators of Operation:
When the unit is on, the LCD display will show either the fan
setting and NORMAL, or the fan setting, purifier setting, and square
footage. If the unit is in Away Mode, it will display AWAY MODE plus
the hours and minutes remaining. See page 7 for more information.
Troubleshooting - What to look for first.
1. I have plugged in the unit, turned “on” the main power switch,
pressed the ON button on the remote (or the unit), and nothing
happens…what's wrong?
• Make sure the power cord is inserted completely into the
receptacle on the back of the unit.
• Make sure the electrical outlet is capable of providing power to the
unit.
• Make sure the rear lint screen and back cover are properly
installed. The tab on the back cover must depress the safety
switch inside the unit (see inset).
• Check to see if the proper fuse is installed and that it is
operational.
Rear safety switch location
If you are operating your central heating and air conditioning
fan or other ventilation system continuously, set the coverage up
to the total ventilated indoor area, otherwise set the coverage up
to the size of the room. Do not exceed the size of the ventilated
indoor area when setting the purifier level. .
*Please note: The AWAY MODE should be operated in unoccupied
areas only. “Unoccupied areas” includes pets. Some pets, like
humans, may experience adverse reactions from exposure to
increased levels of ozone and should not be present during Away
Mode operation.