7
SETTING AND ADJUSTING CONTROLS
1. FAN CONTROL
The disbursement of cleansing properties is best accomplished with good air
circulation. The fan control should be set as high as reasonably possible without
creating an undesirable noise level. This will be determined by personal preference
and the distance you wish the cleansing properties to be dispersed.
Note: A ceiling fan can also aid in distribution of cleansing properties.
2. OZONE CONTROL
Ozone Control: Set the control at the nine o'clock position for one hour.
Adjust the ozone control up or down after one hour based on the
following criteria:
1. In normal conditions it is not necessary to turn the ozone control indicator
above the square-footage of the environment. (
refer to purifier chart, pg.5
)
2. Keeping in mind the previous statement (#1), adjust the purifier so that the
odor of ozone fades into the background 15-30 seconds after entering the
environment.
3. SANITIZING AN AREA
Ozone Control
Fan Control
To sanitize an approximately 12x12 area
for mold, mildew, or bacteria, turn the
unit on high for 3-4 hours.
Caution: Always be sure a room or area
is UNOCCUPIED before performing the
above described sanitizing procedure.
Air out room by opening door and/or
window.
4. ION CONTROL
The normal setting of a DC ionizer is
full negative. This setting seems to work
best in removing particulate (cigarette
smoke) as well as reducing static. When
trying to reduce static, if the full negative
setting results in more static, turn the
ion control in small increments towards
the positive until the static is relieved.
Ion Control
