1
C
himney adjustment rod
is
at the base of chimney.
Attach Chimney Cap with 3 provided screws (A) as shown. The Chimney
will
be locked on top of the Oven
by dropping it in the oven top hole
(knob at a few degrees to the right of center, until the cross rod at the
base drops in the slot holes)
and
then
rotating it clockwise to lock
it, so the adjustment knob points forward
.
To Remove, twist counterclockwise and lift.
Note:
The chimney should be placed so that the chimney
adjustment plate and handle points to the front of the Oven
. Also: It's always a good idea to remove the
chimney when you move the oven for clearance under eves and through doors to prevent damage. But
leave it on when the oven has the cover on it.
NOTE!! THIS STEP H
AS
ALREADY BEEN COMPLETED ON YOUR UNIT.
PLEASE
MOVE TO THE
NEXT STEP ON PAGE 8
Transport
this unit by pulling on the two handles located on the
sides of this unit. The unit will pivot on the wheels and can easily be
wheeled across a
smooth, hard surface
to the desired location.
Take all necessary precautions when transporting this unit to
avoid
excessive tipping
.
Always Lock the wheel brakes once the oven is
in position. Wheels with brakes go on the FRONT of the cart. Fixed
Wheels on the back-pointing front to back.
No.
Name
Size
QTY
A
Chimney Flat Head Screws ½” Long
M6*15
3PCS
No.
Name
Size
QTY
A
Flat Head Screw-1/2”
Long
M6*15 8PCS
ECO-710
10
page|
7
2
3
OVEN Chimney Assembly-
