background image

Dear customers:

In order to use this machine safely, please read this user's manual carefully 
before using and installation, especially pay attention to each notice remark 
for usage and maintenance. Also keep it carefully for later use. Heat pump 
water heater is a professional machine, it may cause damage or hazard when
wrong installed. Relevant installation and maintenance shall be done by 
technical people. Please contact our installation service for reference.

          

1).When using for the first time, check if all the wiring are correct before you 
    connect the unit to power supply.
2).The specifications of fuse is: AC250V, 5A.
3).The appliance must be fitted with means for disconnection from the supply mains
     having a contact separation in all poles that provide full disconnection under
     overvoltage category III conditions, and these means must be  incorporated in the 
     fixed wiring in accordance with the wiring rules.
4). The running range of the heat pump:
     the ambient temperature range -7 ~ 43

;

     outlet water range:12 ~60

     the pressure of water 0.1MPa~0.7MPa.
5).If the power cord is damaged, please replace a new one offered from factory by 
    professional technicians.
6).Power plug's rated current shall be in accordance with the model you buy.
7).The units must be ground wired. Never connect the ground line on neutral line or 
    water pipe.
8).Product shall be singly assigned to a electrical leakage protection  power .
9).Hot water above 50

 may be burned, we suggest that you mix cold water with 

    hot water from water tank for use.
10).Any equipment must not be inserted inside the heat pump unit, in case any
     accident or abnormal operation.
11).For your safety, please DO NOT change or mend the heat pump water heater 
     yourself.
12).Closed water heaters shall be marked with a statement that a pressure-relief 
     device is to be fitted in the installation, unless it is in corporatthe appliance.
13).This appliance is not intended for use by persons (including children) with 
       reduced physical,  sensory or mental capabilities, or lack of experience and 
       knowledge, unless they have been given supervision or instruction concerning 
       use of the appliance by a person responsible for their safety.

          Important warning:

1.PREFACE

1

Summary of Contents for ZR9W Series





















Reviews: