c. Remarks
Make sure to press “SAVE” for each setting.
If IP address changed, all above setting need to re-set.
If you try first way of “Smartlink3 DOMO” and failed,
then try the second way for wifi setting.
Have to long press Turn on/off button (see below pic)
for 10 seconds, otherwise, wifi signal will never come
out.
After wifi connected successful, you could have inquire about heat pump status by below
website. http://app.xlink.cn:9001/query.html
Or you could scan below QR Code to enter the website for Heat pump status checking.
Fast inquire (only to check 1 or 2 heat pump units)
Agent research (Able to check all the heat pumps as order). Or visit below website.
http://app.xlink.cn:9001/login.html
◎
◎
◎
◎
◎
d. Fast Inquiry
Turn on/off button
Ⅵ
.Operation introduction
Water heater
16
