Ecoplus EP-600-TAC Installation & Owners Manual Download Page 2

Page: 2 / 30

Congratulations on the purchase of your ecoPLUS™ Series premium whole house water

filtration system.

Our ecoPLUS™ EP-600-TAC premium whole house water treatment system combines the

powerful chlorine removal capacity of our ecoPLUS™ system with our ecoTAC™ salt-free

hard water conditioning system to provide wide-spectrum treatment for your home.

ecoPLUS™ is specifically engineered to treat city water by removing chlorine, chloramine,

disinfection by-products, bad tastes and odors, and other trace contaminants including

VOCs, pesticides, herbicides, organic chemicals, lead, and more. ecoPLUS™ delivers

refreshing, great tasting drinking water, and protects your skin and hair from the damaging

effects of these contaminants.

Our ecoTAC™ hard water conditioners use a salt-free water treatment technology called

Template Assisted Crystalization (or "TAC" for short) to prevent hard water scale problems in

your plumbing system, appliances, and more.

To get maximum performance from your ecoPLUS™ system, we encourage to read this

manual in its entirely before installation and operation of your filter.

IMPORTANT SAFETY SYMBOLS

Hazards or unsafe practices that may result in personal injury

and/or severe property damage.

Hazards or unsafe practices that may cause operational

problems with your water treatment system.

Summary of Contents for EP-600-TAC































Search results

Summary of Contents for EP-600-TAC

Reviews:

Related manuals for EP-600-TAC

Brands by name

Popular brands

Ecoplus EP-600-TAC, Installation & Owners Manual

Search results

Summary of Contents for EP-600-TAC

Reviews:

Related manuals for EP-600-TAC

Brands by name

Popular brands