USB
Connecting with USB
Data connection and battery charging
Make sure the Mini-batcorder is turned off, then connect it to your computer
via USB. After connecting the Mini-batcorder is mounted by your computer as
mass storage device. You can access all recordings without the need of any
special software. The Mini-batcorder cannot be turned off when connected to
a computer. Als note that the internal battery is charged when connected to a
computer.
Deleting the Mini-batcorder memory
After connecting the Mini-batcorder to your computer you can initiate a me-
mory delete by deleting the LOGFILE.TXT. At the next startup the Mini-bat-
corder then will reformat its card and delete all files.
Using an external power source
The Mini-batcorder can use an external power source that is connected to
USB. Note that due to the low power intake of the Mini-batcorder the USB-
powerbank must also work if power of less than 20mA is drawn.
To use a USB-powerbank first start the Mini-batcorder. After it has started re-
cording mode you can connect the powerbank.
If the powerbank is recognized and gives power, the three LEDs flash one
after the other in green.
If the power bank is not giving power anymore or is disconnected, the three
LEDs flash in red one after the other.
11
