00: CUSTOMER
ECOM
TM
Driver
Installation Manual
Doc. No. ER000060_00 Rev E1-
Page 4 of 12
(see detail on Title Page)
EControls LLC. Confidential and / or proprietary information. Do not copy or distribute without prior written approval.
1
INTRODUCTION
Thank you for purchasing an ECOM
TM
cable from EControls.
The ECOM
TM
cable is a USB 2.0 device that allows Controller Area Network (CAN) traffic to be
transmitted and received using a computer or laptop. It was originally designed by EControls to
provide a CAN interface for our OEM customers to communicate with our Engine Control Modules
(ECMs), but it is now offered for use in custom software development.
ECOM
TM
is available in multiple variations which are designated numbered as
E20460XX
, where
E20460
= the ECOM
TM
family part number root, and
XX
= an application-specific part number modifier..
The following ECOM
TM
variations are designated by part number and logo color as follows:
ECOM
TM
Part
Number
Logo
Color
Application
E2046002
Green
GCP / 4G ECOM™ device (Standard)
E2046003
Blue
GCP / 4G ECOM™ device (CANCapture™-Compatible)
E2046012
Green
GCP / 4G ECOM™ v2 device (Standard)
E2046013
Blue
GCP / 4G ECOM™ v2 device (CANCapture™-Compatible)
To start using any ECOM
TM
variation you will first need to install the software driver. Please refer
to the steps contained in the following sections of this document for software driver installation
instructions.
