Page 20
OMNI by EconoHeat
NOTE:
Combustion Chamber Warranty is speciic to material and workmanship. Workmanship
means EconoHeat warranties the welds are good and will hold. Material means they will not
corrode through due to sulfur in the ash that accumulates during operation. Warranty does
not apply to units that experience overheating stress cracks. These are not incurred because
the materials are inadequate for the application nor are they results of a weld breaking lose
because of bad penetration, which is easily recognized by the metal left beneath the weld.
These cracks occur as a direct result of (1)improper draft, either by inadequate initial installation
and setup, which requires (a) establishing a proper draft during installation (b) back draft has
occurred due to ash buildup, backing up hot gas passageways in either the exchangers, the
stack, or both. (2) Over iring by setting oil supply pressure too high (see manual for proper
setting) these are all cases of thermal overload.
*Under normal use only. If misuse or abuse is deemed apparent after inspection, warranty is void.
Warranty Card
Please fill out, tear off and return to manufacturer within sixty (60) days of purchase, or warranty will
not be valid. Please print or type.
Date of Purchase:
Serial #:
Model #:
Customer (Company) Name:
Address:
City:
State: Zip Code:
Dealer:
Address:
City:
State: Zip Code:
Installed By:
