Article-No.: 222421 // Index: 0.6
econ sens+
page 3 of 4
EN
Operation and installation
Connect the
econ sens+
to the power supply as shown in Fig. 1. When installing the
Rogowski coils please ensure that they are mounted in the correct direction, as depicted on
the coils themselves.
Connect the
econ sens+ / econ sens+ pro
to your PC via the network cable. Enter the IP-
address 192.168.0.1 in your web browser to access the
econ sens+ / econ sens+ pro
web interface. When the appliance to be measured is switched on, the measured data
(vol
tage, current, output…) should be visible in the “Meter” menu.
For further assistance and troubleshooting information please consult the
econ sens+ /
econ sens+ pro
user guide, which is available at
www.econ-sens.com
.
