EcoMotion MINI Pro, User Manual, Page: 24 / 24

24
Problem Possible cause Solution
Motor runs without using TAG /
PAS systems
Faulty PAS sensor Replace sensor and retest
Faulty throttle Replace throttle and retest
Wire short
Replace main cord and
throttle cord and retest
Faulty controller Replace controller and retest
TAG system doesn't work
Motor shutdown system operated
Make sure that bake handles
in their place
Faulty throttle
Replace the throttle and
retest
Faulty controller Replace controller and retest
Throttle button not pressed in press in the shutdown button
Display rupture wire Replace the display and test
Motor make a “drilling” noise and
reduce power / shuts off
Low battery Charge the battery full charge
Motor gear damaged Replace motor gears
Charger doesn't charge the battery
Burnt fuse Replace the fuse
Faulty charger Replace the charger
Outlet has no power Check a different outlet
Charger shows s full charge in an
unusually short amount of time
Faulty charger Replace the charger
Battery lifetime is over / shortened Replace the battery
Charger indicator light flashes and
not change into red (not charging)
Faulty charger Replace the charger
Bicycle has intermittent power
Loose connector Check all connectors
Loose fuse Check fuse connector
Damaged wires Inspect all wires
•
Error symbols specified on page 17