16
•
Turn on / off the display power by long press on the
button.
(make sure that the battery is on before turning on the display).
•
You can switch PAS speed levels by short presses on the
button PAS level "0" - without support, PAS level "5"- strongest
support.
•
Short press the
button will change the display’s shown info
•
Long press on
will activate the walking mode (the button
must be hold pressed, the walking mode will be terminated when
leaving the button).
•
Long press on both
&
buttons will lead to the
settings
screen options. Short presses on
button browse between the
settings. Short presses on
button change the setting’s info. In
order to leave the settings screen long press both
&
buttons.
Display settings:
P01: Screen backlight level (1-3)
P02: 0 - Km/h 1- MPH
P03: Battery Voltage (24V/36V/48V)
P04: Sleeping time (minutes for display automatically shuts
- off)
P05: PAS levels in use (5 bars / 3 bars)
P06: Wheel dimeter
P07: Motor speed sensors (1 for current motor)
P08: Speed limit (input data in Km/h unites)
P09: 0 – TAG works immediately, 1- TAG works only after PAS in use.