Tabelle 1: Eingangs- und Ausgangsklemmen
Nr.
Name
Beschreibung
1, 2
Isolierte Mesßbuchsen für
Spannung und Strom (mA)
Eingangsklemmen zur Messung von Strom,
Spannung und separater Stromschleifenversorgung
3
TC-Eingang-/Ausgang
Klemme zur Messung oder Simulation von Thermo-
elementen Geeignet für gepolte Miniaturstecker für
Thermoelemente mit flachen Inline-Kontakten mit
einem Mittenabstand von 7,9 mm
4, 5
Simulation / Messung von
V, RTD 2W, Hz
Klemmen zur Simulation und Messung von
Spannung, Frequenz, Impulsfolgen und RTDs
6, 7
Simulation / Messen von mA,
3W und 4W
Klemmen zur Simulation und Messung von Strom
sowie für RTD-Messungen mit 3- und 4-Leiter-
Schaltung
8
Druckmodulanschluss
Verbindet den Kalibrator mit einem Druckmodul für
Druckmessungen.
9
Serieller Anschluss
Verbindet den Kalibrator mit einem PC zur Fernbe-
dienung.
Abbildung 2 zeigt die Position der Tasten am Kalibrator. Tabelle 2 enthält die
Funktionsbeschreibungen jeder einzelnen Taste.
Abb. 2. Tastatur
5