EcolocityLED.com
775-636-6060
IR Sensor Switch for LED Strip Light Channels
SKU: LC-KL-SENS-1
INSTALLATION
pg. 2 of 2
1.)
Tin Input Connections
Using electrical solder �n both
pads of your 12VDC input
connec�ons.
2.)
Tin Lead Wire
Strip your 18-22AWG stranded
wire approximately 1/8”. Tin the
exposed wires with solder.
3.)
Solder Lead Wire
Mate the �nned wire to its
respec�ve polarity on power
input.
4.)
Tin LED Strip Light
Align your strip light with
correct polarity, secure strip
and �n the copper pads on strip.
5.)
Solder Strip Light
Solder the strip to the dimmer
using a firm edge to keep �ght
pressure while solder cools.
6.)
Prep End Cap & Cover
Slide on end cap and cut a small
piece of cover to hide the end of
the IR sensor.
7.)
Adhere to Channel
Peel the tape from the back of
your products then adhere
them inside your channel.
8.)
Press on Cover
Push your small and larger cover
pieces into place. The IR sensor
must be exposed to operate.
9.)
Apply 12VDC Power
Connect your lead wires to the
respec�ve polarity of your
12VDC power source.
10.)
Wave 1-4” from Sensor
Wave your hand 1-4” from the
sensor to turn on / off. Hold
your hand in front to dim.
