ecolight SE1049-BP2-02LF0-E User Manual Download Page 4

- 4 -

Printed in China

 Warranty

6 YEAR LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and 

workmanship for a period of (6) years from the date of original purchase by the consumer. 

The fixture is not warrantied for use in a commercial or retail application. The warranty is 

limited to use in a residential environment. We will repair or replace (at our option) the 

unit in the original color, and style if available, or in a similar color and style if the original 

item has been discontinued, without charge. Defective units must be properly packed and 

returned to the manufacturer with a letter of explanation and your original purchase 

receipt showing date of purchase. Call to obtain a Return Authorization Number and an 

address where to ship your defective product. Note: C.O.D. shipments will NOT be 

accepted. The liability of the manufacturer is in any case limited to replacement of the 

defective light fixture product. The manufacturer will not be liable for any other loss, 

damage, labor costs or injury which is caused by the product. This limitation upon the 

liability of the manufacturer includes any loss, damage, or injury which is (I) to person or 

property or otherwise; (II) incidental or consequential in nature; (III) based upon theories 

of warranty, contract, negligence, strict liability, tort, or otherwise; or (IV) 

directly, or indirectly related to the sale, use, or repair of the product. This warranty gives 

you specific rights, and you may also have other rights which vary from state to state.

 All rights Reserved.

Summary of Contents for SE1049-BP2-02LF0-E

Page 1: ...ouching a grounded bare metal surface to remove this hazard CAUTION This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation IMPORTANT Select the installation location carefully Do not insta...

Page 2: ...PIR range to approximately 30 feet The LUX control knob can be adjusted for the surrounding level of darkness needed to activate the PIR Fig 6 This is quite variable The far left position sets for maximum level of darkness or near full darkness The far right position sets for minimum level of darkness Operating Instructions The individual light heads can be adjusted side to side and up down indepe...

Page 3: ...s return to normal Troubleshooting Guide Problem Cause Solution Fixture does not light 1 ON OFF switch is not set correctly 1 Slide ON OFF switch to ON position 2 Batteries are defective 2 Replace the batteries 3 Batteries are installed wrong 3 Install the batteries correctly 4 Battery compartment cover 4 Check battery compartment is loose cover and or screw Light flickers on 1 Photo sensor is pic...

Page 4: ...hase receipt showing date of purchase Call to obtain a Return Authorization Number and an address where to ship your defective product Note C O D shipments will NOT be accepted The liability of the manufacturer is in any case limited to replacement of the defective light fixture product The manufacturer will not be liable for any other loss damage labor costs or injury which is caused by the produ...

Reviews: