ROUTINE CLEANING AND MAINTENANCE
Regular maintenance can improve the service life and driving safety of the electric scooters. Please refer to the fol-lowing
suggestions and take care of your scooter.
Failure
Causes
Solutions
The scooter has no electricity,
and the READY lamp does not
shine.
Battery is poorly connected.
Air switch is not turned on.
Connect the battery properly at its main plug.
Turn on the air switch.
When turning the speed regulating
steering handle-bar, the motor
does not turn after being powered,
Low battery volume.
Side stand is not retracted.
Brake handle does not reach the right
position.
Steering handlebar failure.
The controller plug is loose.
Controller failure.
Charge the battery.
Put away the side stand.
Close the parking key.
Place the brake handle at the right position.
Change handlebar.
Re-plug controller.
Change controller.
Speed is slow or mileage is short.
Low battery.
Under-
inflated tire.
Heavily overloaded.
Brake pads interference.
Battery aging or normal scrap.
Charge the battery.
Inflate the tire, and check the tire pressure before
riding.
Foster a good habit, and keep the appropriate load
Change the brake pads and check the brake system
before riding.
Change battery.
Check whether the main plug is in a right place
Use the special charger.
Battery can not be charged.
Poor contact of the main plug of the
charger.
Do not use the wrong charger.
Battery aging or normal scrap.
Battery low-voltage protection.
Contact of the main plug again.
Contact with local service office of battery.