background image

MAINTENANCE 

 

 

ROUTINE CLEANING AND MAINTENANCE

 

Cleaning: Please use clean water and neutral detergent to clean it, and use soft cloths and sponges to clean the surface;

 

it is prohibited to use metal brushes, sandpaper or the like to clean it, in order not to scratch the parts surface. After cleaning,

 

dry it with soft cloths. 

TIPS

Please disconnect the air switch before cleaning.

 

Do not use strong water jet to directly wash it, so as to avoid the default of mechanical parts caused by water invasion. 

 

Storage: try to park it in a dry and cool room to reduce the exposure to sun and rain and avoid the reduction of service life due 
to corrosion of parts.

 

When left unused for a long time, please turn off the air switch and disconnect the power supply circuitto prevent over

 

discharging.

 

After long-term storage, please fully charge it before use.

 

REGULAR INSPECTION AND MAINTENANCE

 

The new scooter must be subject to the first inspection and maintenance in the  Service Center when it reaches 1,000 km 
or two months (whichever comes first).

 

The scooter is recommended to be subject to regular inspection and maintenance in the Service Center at every 3,000 km

 

or six months (whichever comes first).

 

TIPS:

 

Please disconnect the air switch before cleaning.

 

Do not use strong water jet to directly wash it, so as to avoid the fault of mechanical parts caused by being damped.

 

Summary of Contents for City One S4-W


















Reviews: