ecofort 2554TCT, Manual

Page: 19 / 44

19
Factory reset
Factory reset sets all values on the thermostat to their initial
state, as well as unpairs the thermostat with all the paired
receivers.
1. Open the advanced settings display.
2. Rotate the rotary push button, select the
ADVANCED and hold the rotary push button to
enter advanced menu.
3. Hold down the rotary push button.
4. Release the rotary push button when all the
symbols are displayed.
5. Wait for the thermostat to restart and return
to the main screen.
6. Briefly press the side button to exit the
advanced settings display or wait for 3 minutes.
For a factory reset of individual receivers it is necessary
to go to each one of the paired receivers. Hold the on/
off button for 10 seconds. The indicator for a successful
reset is when only the red light signal shines. Then release
the on/off button. The receiver restores all its data to its
factory settings as well as disconnects from the WiFi and
unpairs with the thermostat. After the reset the red signal
light starts blinking and indicates that the receiver is in its
factory state.