ecofort 2554TCT, Manual

Page: 17 / 44

17
SmartPairing mode
SmartPairing allows easy connection of the thermostat with
up to 6 receivers.
1. Open the settings display.
2. Rotate the rotary push button, select the
SP
and hold the rotary push button to enter
SMART PAIRING.
3. The thermostat then connects with devices
that are put on a factory reset.
4. Symbol
SP
is blinking and the number of
connected device is shown (maximum 6 devices).
5. Hold the rotary push button to exit manually
until the screen for choosing the primary device
shows up.
6. To exit to the same screen automatically, wait
for 30 seconds after the last added device, or 3
minutes if there is no added device.
Symbol
SP
starts to blink when entering
the SmartPairing mode.
0 1