EcoFlow EFG100, User Manual

Page: 17 / 78

13
Application
Power Factor 1 0.8–0.95
0.4–0.75
(Efficiency 0.85)
Output ≤ 1800 W ≤ 1440 W ≤ 612 W
Please make sure that the total load of the generator is within the rated range before using the
generator, or otherwise the generator may be damaged.
When this generator is supplying power to precision instruments, electronic controllers, personal
computers and microcomputers, please keep the generator a sufficient distance away from any of the
foregoing equipment to avoid electromagnetic interference, and at the same time, to ensure that the
generator will not be interfered with by these electronic devices.
If this generator is used to supply power to medical devices, it is recommended to consult with
the corresponding equipment manufacturers and technicians first. This is because some electronic
equipment or general purpose machines in hospitals require a strong current upon startup and may not
be able to use the generator. Please contact the equipment manufacturer for confirmation even if the
respective start parameters of the equipment satisfy the conditions listed in the table above.
There may be local laws or regulations applicable to the intended use of the generator set. Please
consult with qualified electricians, electrical inspectors or the local authorities with jurisdiction for
further information.
In some areas, generator sets must be registered with local utility companies.
Generator sets, if used on construction sites, may be subject to regulations.
2.4.6 Application Range
2.4.7 Special Requirements
Warning
Caution