ECOFER FAIRLAND TurboSilence INVERX IXCR110T, Installation & User Manual

Page: 19 / 32

Installation and user manual
- 16 -
before the water pump for long life circle.
➢
The user should start the water pump, and check for any leakage of water; Power on and press
the ON/OFF button of the heat pump, and set desired temperature in the
thermostat.
➢
In order to protect the heat pump, the heat pump is equipped with start delay
function. When starting the heat pump, the fan will start to run in 3 minutes, in another
30 seconds, the compressor will start to run.
➢
After pool heat pump starts up, check for any abnormal noise from the heat pump.
➢
Check the temperature setting
5.4. Maintenance and winterizing
5.4.1 Maintenance
The maintenance should be carried out once per year by qualified professional technician.
➢
Cut off power supply of the
heat pump before cleaning,
examination and repairing .
Do not touch the electronic
components until the LED
indication lights on PCB turn off.
➢
Please clean the evaporator with household detergents or clean water, NEVER use gasoline,
thinners or any similar fuel.
➢
Check bolts, cables and connections regularly.
5.4.2 Winterizing
In winter season when you don’t swim, please cut off power supply and drain water o ut of the
heat pump. When using the heat pump under 2
℃
, make sure there is always water flow.
Important:
Unscrew the water union of inlet pipe to let the water
flow out.
When the water in machine freezes in winter season,
the titanium heat exchanger may be damaged.