Switch on the lighting using the dimmer shaft. Then use a screwdriver
to slowly turn the MIN potentiometer (back of the product) to the right
for stable light. Is the light already stable? Then slowly turn the MIN
counterclockwise for even better dimmability until the lights start flashing
just before the point. That is the best dimmability of these LED lamps.
Connection diagram
MIN/MAX Settings
MIN adjustment:
MAX adjustment:
Switch on the lighting using the dimmer shaft. Then turn the dimmer shaft as
far to the right as possible (maximum light output). Are the lamps flashing?
Then turn the MAX potentiometer (back of the product) slowly to the left
with a screwdriver for stable light in the maximum light position. Is the light
already stable? Then turn the MAX to the right for the maximum light output
of these LED lamps.
For optimal results, you can adjust the lights with the MIN and MAX settings.
This cord dimmer has been specially developed to be able to dim dimmable
LED lamps. The cord dimmer works from LED power of 0W and you can connect
a maximum LED power of 50W to the cord dimmer. For halogen lamps and light
bulbs the maximum is 100W.
- MIN / MAX settings for optimal light stability
- Memory for the last selected brightness
- Soft-start system
- Push-turn button
- Available in white and black
Led dimmer phase cut R,C
ECO-DIM.08
Manual
230V
Dimmer
Input
Output
Input
Output
230V
12V
Dimmer
LED trafo dimmable
Dimmer installation 230V
Dimmer installation 12V with LED trafo dimmable
L Line
(Often blue
wire)
N Line
(Often brown
wire)
L Line
(Often blue
wire)
N Line
(Often brown
wire)
ECO-DIM.08 (W) white
ECO-DIM.08 (B) black
