P L
P L
Step 1. Press the reset
button for 3 times.
Step 2. The indicator will
start blinking purple and
stay solid for 10s when
remove done, timeout
3mins.
3) Remove from a Z-Wave Network
Method 1. From your Z-Wave hub interface, choose to delete or reset the device as instructed.
Method 2. Remove from the Device, see below instructions.
Step 1. Press the reset
button for 5s.
Step 2. When the
Indicator stay in Red for
10s, reset finished.
4)
Factory Reset
Please Note:
This procedure should only be used when the primary controller is inoperable.
All configuration will be reset after the device is reset or remove from the network.
8
