P L
5. Operation
1) SmartStart Inclusion
Smart Start enabled products can be added into a Z-Wave network by scanning the Z-Wave QR
Code present on the product with a controller providing SmartStart inclusion. No further
action is required and the Smart Start product will be added automatically within 10 minutes
of being switched on in the network vicinity.
1. Add the dimmer controller DSK into the primary controller SmartStart Provisioning List.
(
If your controller does not support SmartStart inclusion, please refer to the manual for your
controller for non-SmartStart inclusion.
).
2. Power cycle once for dimmer controller.
3. The dimmer controller will send “Explorer Auto inclusion” frame to start SmartStartInclu
-
sion.
4. Wait a moment, the dimmer controller should be added to the controller.
Note: The dimmer controller will SmartStart Inclusion when it is removed from a Z-Wave
network.
The Dimmer has a DSK string, you can key in first five digit to increment SmartStart process, or
you can scan QR code. The QR code can be found on the Dimmer controller or in the box.
Ex: 65286-19008-32952-20593- 44872-18102-41266-46651
2) Inclusion to a Z-Wave Network
Step 2. Double Press the reset
button.
Step 3. The indicator
will start blinking blue
and stay solid for 10s
when pairing succeed,
timeout 15mins.
Step 1. Remove the device from previous Z-Wave network if it has already been added to,
otherwise pairing mode will be fail.
7
