8
Setting date and time
After inserting the batteries for the first time the date
will flash on the display. Now, date and time can be set.
Set date with the selector wheel.
Confirm with
OK
. Set month with the selector
wheel. Confirm with
OK
. Set day with the
selector wheel. Confirm with
OK
. Set hour
with the selector wheel. Confirm with
OK
.
Set minute with the selector wheel. Confirm
with
OK
– That´s it.
On the display
will be shown. Now, the motor
will completely move to the installation position in
order to make the installation easier. As soon as
TTD101 is ready for installation
will be shown on
the display.
You can also set date and time via the menu item
TIME
later on. But in case of that, TTD101 does not
move to the installation position.
→
In case of replacing batteries, the stored time
programme will remain active. You should check
the specified time to ensure that.
