26
off the black cover and find the inclusion / exclu-
sion button (see Figure 1).Now remove the pro-
tection from the batteries.
2. Power on the receiver with the supplied adapter
paying attention to the polarities (see Figure 3).
3.
For Inclusion: Put MyVirtuoso Home gateway into
“inclusion” mode and press the inclusion button
of the device 3 times within 1.5 seconds. The blue
LED will be solid or completely off if the device
was included successfully.
For Exclusion: Put MyVirtuoso Home gateway
into “exclusion” mode and press the exclusion
button of the device 3 times within 1.5 seconds.
The blue LED will be flashing constantly if the de-
vice was included successfully.
Note:
During the inclusion/exclusion phase, the device
should be within 1 meter of MyVirtuoso Home gateway.
4.
Finally power on the transmitter with the supplied
adapter paying attention to the polarities (see
Figure 4)
Mounting procedures
The mounting procedure of the infrared barriers is
composed of:
Summary of Contents for SmartDhome
