15
The modules LED il-
luminates, but can-
not control the ON/
OFF switch of the
load attached.
Check if the load
plugged into the
Module has its own
ON/OFF switch.
Set the ON/OFF
switch of the load
attached to ON.
The module LED il-
luminates, but the
gateway cannot con
-
trol the Module.
1. Module has not
been paired cor-
rectly.
2. Same frequency
interference.
1. Carry out pairing.
2. Wait for a while to
re-try.
LED keeps flashing
for 30 seconds, but
cannot control.
Overload has oc-
curred.
Remove the load at-
tached or check that
max. load has not
exceeded the resis
-
tive load.
Warning
Do not dispose of electrical appliances along with gen-
eral waste, use separate collection facilities.
Contact your local councin for information regarding
the collection systems available.
If electrical appliances are disposed of in landfills or
dumps, hazardous substances can leak into the ground
-
water damaging the environment and human health.
When replacing old appliances with new ones, the re-
tailer is legally obligated to take back your old appli
-
