Approvals
This product was designed and built in
accordance to RoHS directive 2002/95/EC
and contains no hazardous substances as
defined by this directive.
FCC Compliance Statement
Compliance Notice:
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
This device complies with part 15 of FCC
rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
Change or modifications that are not
expressly approved by the manufacturer
could void the user’s authority to operate
the equipment.
RF Exposure Information:
This equipment complies with FCC
radiation exposure limits set forth for an
uncontrolled environment. In order to avoid
the possibility of exceeding the FCC radio
frequency exposure limits, human proximity
to the antenna shall not be less than 20cm
during normal operation.
LEGAL
Industry Canada (IC)
Compliance Notice:
This device complies with Industry Canada
license-exempt RSS standard(s).
Operation is subject to the following two
conditions:
1. This device may not cause interference,
and
2. This device must accept any interference,
including interference that may cause
undesired operation of the device.
This Class B digital apparatus complies with
Canadian ICES-003.
RF Exposure Statement:
This equipment complies with IC RSS-102
radiation exposure limits set forth for an
uncontrolled environment. This transmitter
must be installed to provide a separation
distance of at least 20 cm from all persons
and must not be collocated or operating
in conjunction with any other antenna or
transmitter.
Industrie Canada (IC)
Avis de conformité :
Le présent appareil est conforme aux
CNR d’Industrie Canada applicables aux
appareils radio exempts de licence.
L’exploitation est autorisée aux deux
conditions suivantes :
1. l’appareil ne doit pas produire de
brouillage, et
2. l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Énoncé sur l’exposition aux fréquences
radio :
Cet équipement est conforme aux limites
d’exposition aux fréquences radio d’IC
RSS-102 définies pour un environnement
non contrôlé. Cet émetteur doit être installé
à au moins 20 cm de toute personne et
ne doit pas être colocalisé ou fonctionner
en association avec une autre antenne ou
émetteur.
FCC ID:
WR9EBSTAT3LT01
IC ID:
7981A-WR9EBSTAT3LT01
CAN ICES-3 (B)/NMB-3(B)
Warning: Changes or modifications not
expressly approved by ecobee Inc. could
void the user’s authority to operate the
equipment.
3-Year Limited Warranty
ecobee warrants that for a period of three
(3) years from the date of purchase by the
consumer (“Customer”), the ecobee3 lite
(the “Product”) shall be free of defects in
materials and workmanship under normal
