© 2019 EcoAir 8 All rights reserved
Operating Instruction
-
Remote Control
PLUG FAN INTO THE MAINS POWER, A BEEP WILL SOUND SIGNIFIYING THAT THE FAN IS READY TO BE
USED
On/Off Button
Press this button to switch the fan on and off.
Fan Speed Button
Press this button to increase your fan speed from 1 to 12. The fan runs at a constant speed based
on your selected wind speed setting.
OSC KEY
After the fan starts, press this button to start or stop oscillation.
Timer Button
This is a On/Off timer. Whilst the fan is off, press this button to set the on
-
timer. Press the timer
button to increase the time intervals, 0.5 to 12 (1/2 hrs to 12 hrs).
When the fan is running, press this button to set the off
-
timer by repeating the same steps above.
Timer mode can be cancelled by pressing the timer button until you reach the 0.0 interval.
Front
Back
Using the Remote Control
-
Point towards the front of the fan
(Within 5 meters)
-
Use size
“
AAA
”
manganese or al-
kaline batteries
-
Do not use rechargeable batteries.
USEFUL INFORMATION
Batteries
Please note batteries for the remote control are not included and must be purchased separately.
Battery Disposal
Do not dispose of batteries in fire, batteries may explode or leak. Do not Mix old and new batteries. Do
not mix alkaline, standard (carbon
-
zinc) or rechargeable (nickel
-
cadmium) batteries.
