© 2019 EcoAir 5 All rights reserved
1.
Remove the Right
-
Angle Bolt and Washer from the Pole. Position the Pole into to the Base
ensuring the pole is aligned into the groove in the base.
2.
Tighten the Pole to the base using the Right
-
Angle Bolt. Ensure you position the Washer be-
fore tightening. To tighten turn the Right
-
angle bolt clockwise.
3.
Slightly loosen the Spinner Lock and raise the Internal Chrome Bar to its maximum and then
tighten the Spinner Lock.
4.
Loosen the Tighten knob on the back of the Motor Arm and then position onto the Internal
Chrome Bar. Once in place tighten the Tighten knob firmly.
Assembly Instruction
-
Body
