5
This unit has 3-min lag due to the device for protecting circuit .In order to prolong the compressor's
If the ambient temperature is too low the unit will automa-
carefully remove the tank and empty the collected water.
To empty the unit, first unplug from power source then
The lamp will illuminate when the water container is full.
Before using, remove and re-install bucket to properly
set the float switch.
Defrost Lamp
tank with two hands
Start Operation
OPERATING INSTRUCTIONS
( , , ) or CONTINUOUS to work.
clogged.
tically start to defrost and the light will illuminate. The
defrost lamp will also illuminate if the air filter becomes
Replace the bucket carefully before switching the unit on
again.
Full Bucket Lamp
Do not use the extension cord or the same socket with other electric appliance.
working life, the compressor will not start until the unit has run for 3 minutes.
R emove the water in the water
RUNNING
DEFROST
FULL
While turning on ( or off ) the machine , the defrost lamp would be bright once .
The unit will shut down when turned to OFF position
or when the tank is full.
Humidistat Dial
Turn the knob clockwise to turn on the unit with a desired humidity setting.
Turn it counterclockwise to switch off.
The humidistat can be set along (80 ~ 60%RH), (60 ~ 45%RH), (45 ~ 35%RH) or other
positions to control the unit on and off automatically for keeping the room humidity at a suitable humidity.
At CONTINUOUS, the unit will run continuously
Note: ( RH indicated has a + 8%RH tolerance and may vary depending on room temperature.)
-
