@2022 EcoAir
-
V1.5
Page 9
All rights reserved (E&OE)
EMPTYING THE WATER TANK
The Water Full/Check Indicator lights up when the water tank is full. The appliance will stop operating.
Allow to stand for approximately 30 minutes to ensure all water collected drips into the water tank.
1.
Gently pull the water tank out. Wipe dry the internal compartment
2.
Lift by the handle gently.
3.
Remove the tank lid.
4.
Pour the water away.
5.
Clean the water tank, restore the cover and handle.
6.
Insert the water tank back into to the correct position. (The Water Full light indicator illumi-
nates if the water tank is not correctly in position. If this happens, reinsert again).
NOTE :
•
Clean the water tank with mild detergent if necessary. Do not use solvent, abrasive or
hot water. (After Step 4).
•
When cleaning the water tank, take caution to avoid damaging the float.
•
Do not tilt the dehumidifier when removing the water tank. This is to prevent water
leaking which may cause electric shock.
Pull water tank out
Lift by the handle
Remove the cover
Pour the water away
Restore the cover and the
handle
Insert the water tank
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6