GRID CONNECT SOLAR USER MANUAL
1.
INTRODUCTION
Thank you for choosing Eco Tech Electrical to install your PV solar system. By choosing to
install solar you are offsetting green house gas emissions which when in a surplus are
detrimental to the environment and atmosphere.
1.1
Installation process
To start the process once you have accepted the quote, Eco Tech Electrical will send
off all relevant documents to Power and Water, the building certifier and engineer
while you send off a Power Purchase Agreement document to your retailer. Once
these documents are sent we can start the install as these systems (class 1 or 2) are
pre-approved through Power and Water.
On the day of install our qualified installers would have explained to you the
location/s of the array/s where the inverter or envoy is to be located, any variations
in the job and a rough time frame of the install. Your electricity meter will most likely
have to be swapped to a new bi-directional smart meter to register kilowatt-hours
that are imported and exported between the grid and your premises, along with a
lockable main switch at your meter box which is a national roll out in the NT. Once
completed and commissioned the electrician will answer any questions you may
have and show you how to use/monitor your new system via the screen on the
inverter and/or the online app.
After the install we will assign you an account and link you to the online portal so
you can monitor your system remotely via your phone or tablet. In the mean time
you will receive a certificate of compliance, commissioning sheet, warranty sheets,
engineering specifications and this manual.
