© 2022
Step 5 of 10
Order #XXXXX
Locked layer contains
placeholder marks.
Item
13
14
15
16
17
--
Qty.
1
1
1
1
2
2
Description
96”h CEI152 Vertical Extrusion
96”h CEI152 Vertical Extrusion
46”w CEI152 Horizontal Extrusion
46”w CEI152 Horizontal Extrusion
8” x 22” Base Plate
U-Channel
When assembled
Steps:
Refer to the CEI152 Frame Assembly general information page.
1) Install U-Channel to horizontal [15]. See
U-Channel Attachment
detail.
2) Connect verticals [13,14] between horizontals [15,16].
3) Install Base Plates [17] to bottom of horizontal [15], using bolts & wing nuts.
Hole for wire
management
U-Channel Attachment
Slide V4 connectors into
top groove of horizontal
extrusion. Tighten set-
screws to secure.
Use bolts to connect
U-Channel to
horizontal.
V4
connector
bolts
set
screws
*
AS VIEWED FROM
INSIDE THE BOOTH
13
14
16
15
17
17
U-Channel
*
Side Lightbox Assembly (Left)
