© 2022
Order #XXXXX
1) Slide TWO-PIECE
TS RV 2
L-bracket into
Interior Center Slot of extrusion so that two
set screws are inside groove.
Tighten two set screws to secure.
2) Slide two
A1
L-Brackets into outer interior
grooves of upper and lower horizontals.
Tighten set screws to secure.
4) Slide exposed ends of installed brackets of
upper horizontal into open ends of verticals.
Tighten set screws to secure.
3) Slide vertical extrusion over exposed ends
of brackets in lower horizontal.
Tighten set screws to secure.
Corner Bracket Installation
CEI-152 Profile
TS RV 4
Bracket
V4
V4
Insert two-piece
bracket into the
interior center slot
of extrusion.
Slide V4 Connectors
into front & back
interior grooves.
Secure inserted half of
bracket & connectors
using set screws.
Slide connecting
extrusion over
exposed ends
of bracket &
connectors.
Completed
Assembly
Secure extrusion,
using remaining
set screws.
Set
Screws
Straight Bracket Installation
TS RV 2
Upper
Horizontal
Lower
Horizontal
Upper
Horizontal
Lower
Horizontal
TS RV 2
Insert L-Brackets into the
Interior Center Slot & outer
interior grooves of extrusion.
Slide verticals over
brackets of lower
horizontal, then slide
upper horizontal &
brackets into grooves
& center slots
of verticals.
12 Brackets Total:
(4) - TS RV 2
(8) - A1 L-Brackets
A1
A1
A1
A1
Completed
Assembly
Corner Connection
1) Slide TWO-PIECE
TS RV 4
straight bracket into
Interior Center Slot of extrusion, so that two of the
set screws are inside groove. Tighten two set screws
to secure.
3) Slide connecting extrusion over exposed ends of
bracket & connectors. Tighten all remaining set screws
to secure extrusions.
2) Slide two
V4 Connectors
into outer interior grooves
of extrusion, so that one set screw is inside groove.
Tighten set screw.
Straight Connection
Disassembly
1) Loosen set screws on brackets and slide
extrusions off of brackets.
CEI-152 Frame Assembly
CEI152 Frame Assembly
