4.2 TO PREVENT FALLING WOUNDING
When Hang the fixture, please must verify that the facilities to be able to withstand at least 10
times or more weight of fixtures.
Please make sure the Mounting hardware is strong enough no any damage, and insurance for
the safety rope as auxiliary security fixed in other facilities will need to verify before installation.
Installing or removing the equipment, to make the pulley below the work location
4.3 UA PROTECTION
Forbid straight viewpoint with exposed bulbs to avoid UV damage to the eyes;
Do not use the equipment without the lens screen and the lid;
The lens and the light head covers should be timely replaced if any damage to rupture.
4.4 PREVENTION OF ELECTIC SHOCK
The electrical connection must only be carried out with corresponding qualifications;
Before installing, make sure you use the power voltage lamps must comply with the
identified power, voltage and have an overload or leakage protection;
Each fixture must be properly grounded, installed in accordance with the relevant standards;
Cut off the power when stall or replace the lamp and the fuse;
Forbid using the fixture in storm or wet environment.
4.5 TO PREVENT BURNING OR FIRE
1. The fixture can't be mounted directly on the surface of ordinary combustible material.
2. The equipment must be installed away from inflammable and explosive materials.
3. The highest temperature is 40 ° C when the equipment is in stable state.
4. The equipment can not have an obstacle at least in the range of 0.5 meters.
5. Do not replace the non-original parts.
5. Packing and Shipping
5.1 ATTACHMENT
The LM1915 packed with fly-case of four in one, or carton box.
Attach follow accessory.
Content
Quantity
User Manual
1
DMX Cable
1
Safety Rope( charge)
1
5.2 About Device Package
1. Before packed, make sure power is off, and wait for at least 6mins for cooling down.
Summary of Contents for LM1915
Page 1: ...Wash 19x15 Content ...
