SunTrackerTwo Installation
1
2
6
5
4
3
Make sure light wells have been properly installed before proceeding to this stage.
1
1
1
1
1
1
1
1
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
Tray assembly, as it is shipped.
The Mirror, short vertical post and the mirrors mounting
bracket, are shipped within the tray assembly.
It is not recommended to do an installation of the
SunTracker Two during high wind conditions. Even in
light wind conditions, care should be taken so that the
mirrors and trays are not damaged by a sudden gust.
Remove Mirror from tray assembly.
6
6
6
6
6
6
6
6
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Taking care so as not to bend the mirror,
peel off the protective tape from the reflective
surface (there is tape only on the reflective side
of the mirror).
Run the pre-attached bolts of the mirrors mounting
bracket through the two holes in the mirror. Make sure
the mounting bracket is positioned as shown, and that
it is on the reflective side of the mirror (the bend at the base of the mirror faces away from the
reflective surface). Attach two black plastic nuts (provided) to the bolts and hand tighten.
1
2
3
4
TOLL FREE:(888)329-2705 [email protected] www.eco-smart.com
PAGE 2
Eco-$mart, Inc.
