With the lower lens in place, lift the light well over the curb and allow it to slide down into place.
With the lower lens in place lift the light well
he
b
d allo
it t slid do
int pl
1
Light Well Assembly and Installation
4
3
2
1
8
7
Gently lower the bottom lens into place, and
seal lens into place with double-sided foam
tape or caulk.
On longer light wells, it is recommended that
the bottom lens be put into place from inside
the building after the light well is attached
(this may require a lift).
6
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Repeat this process with the remaining sections until all four sections are connected and
you have an open ended box with an outward facing flange on the top and an inward
facing flange at the bottom.
5
4
3
Check that the well fits snugly onto the
top of the curb all the way around.
9
TOLL FREE:(888)329-2705 [email protected] www.eco-smart.com
PAGE 3
Eco-$mart, Inc.
